The X-RAY foreign material inspection machine is a food-only inspection machine, which is the final inspection stage after food packaging.

The general conveyor-type metal detector has the disadvantage of being treated as defective even if there is metal in the packaging.

In the case of vinyl + wire packaging that is common in the market, the conveyor metal detector is recognized as defective, but the X-RAY inspector can filter the packaging.

Products packaged in aluminum such as cans must use a mandatory X-ray inspection machine.

Our company's X-RAY products are divided into X-1, X-2, X-3, X-4 according to the measurement size and speed.

In case of X-1~3, put the product to be measured on the left entrance and it will move to the measuring section along the belt.

Measurements are made in an instant without the need to stop the belt, and products without foreign substances are passed through the right outlet.

When a foreign object is detected, the operation stops with a warning sound.

The X-4 is an essential machine for mass production.

By connecting the inlet and outlet with a conveyor, it can pass up to 90M per minute (can = about 70,000 per hour)

It is a method of separating when foreign substances are detected, and the conveyor does not stop, increasing production efficiency.

Measurements are iron 0.3mm, copper 0.5mm, stainless steel 0.5mm, glass mm, and ceramic 1.5mm.